Best Worksite Floor Cleaning Approaches

Floors in commercial facilities like offices, retail stores, hospitals, or nursing homes often bear the brunt of heavy foot traffic and are consequently prone to wear and tear. As valuable investments, maintaining their cleanliness and appearance is paramount. Effective floor care entails many things, from mats to routine mopping and selecting the appropriate cleaning products and equipment. Consistent upkeep and the right cleaning supplies are vital for preserving the condition and appearance of your floors and maintaining a clean office. However, this blog focuses on the different floor cleaning approaches you can incorporate into your office’s cleaning routine.

clean office floors

Most Common Floor Cleaning Approaches

Dry Mopping

This cleaning method uses a mop with no water or cleaning solution to pick up dust, dirt, and debris from hard surfaces. To start, assemble all necessary materials, such as a dry mop, dustpan, and brush, for the cleaning process. The brush proves helpful in picking up larger debris. Clear the floor of any substantial debris or trash present. Hold the mop handle at a forty-five-degree angle and push it forward systematically across the floor, checking for soil buildup during dry mopping. Replace the mop head as necessary. Collect the accumulated dust and debris using a dustpan. It is best used during construction cleaning phases since there would be a lot of dust and debris after all that building.


Wet Mopping

Wet Mopping, on the other hand, is the opposite of dry mopping. It involves using a damp mop or cloth with a cleaning solution to clean and disinfect floors or surfaces. It helps remove dirt, stains, and germs while leaving the surface wet for a short period before drying. You’ll need a few things ready: a mop bucket, a wet floor sign, and a cleaning solution. Set up the wet floor sign where you’ll be cleaning. In the mop bucket, mix water and your chosen cleaning solution. Dip the mop in the solution, squeeze out excess liquid, and mop the floor at a 45-degree angle. Remember the corners! After you’re done, wash and rinse the dirty mop for next use.


Floor Scrubbing

Floor scrubbing is like giving your floor a deep, thorough cleaning using specialized machines or equipment. It’s a great way to get rid of dirt, stains, and grime, leaving your floor looking fresh and clean. Prepare the floor cleaning machine with a scrubber head, pads, hand pad, and duster. Check for exposed wires before using it. Clear the floor by removing furniture. Fill the machine’s tank with water and cleaning solution. Secure the power cord on your shoulder and clean the floor in a zigzag pattern with overlapping passes. Use a hand pad and duster for corners and tricky spots. Remove excess water with a wet vacuum and finish with a final wet mop pass.


Floor Finishing

Floor finishing refers to applying a protective coating, usually a sealant or wax, to a flooring surface to enhance its appearance, durability, and resistance to wear and damage. Ensure you have the equipment, including the commercial floor cleaning machine, buffing head, pads, and the appropriate buffer cleaning chemical for your specific floor material. Attach the buffing head to the floor cleaning machine and apply the designated protector cleaning chemical evenly across the floor surface. Drive the machine in a systematic zigzag pattern, ensuring that each pass overlaps to guarantee comprehensive coverage of all surfaces.

well sanitized office floors

Preventive Maintenance

Floor Matting Program

Effective floor maintenance begins right at the entrance. Utilizing suitable matting is the initial measure to prevent dirt and moisture from reaching and damaging the floor. High-quality mats act as the first line of defense, trapping debris and moisture from shoes, wheelchairs, and equipment used by employees, customers, and visitors. By minimizing the contaminants brought indoors, these mats significantly contribute to preserving the flooring’s cleanliness and longevity, ensuring that you consistently achieve that clean office. Proper matting also enhances safety by reducing slip and fall risks in areas prone to wet or slippery conditions. Consequently, starting with suitable mats is fundamental to any successful floor care strategy.

  • Outside Matting
  • Entry/Foyer Matting
  • Inside Matting


Daily Maintenance

Dust Mopping

Dust mopping is crucial in maintaining floor quality by preventing damage from dirt particles and preserving its shine. This task should be a daily routine or as frequently as needed to ensure the floor remains grit-free. Before proceeding with damp mopping or auto scrubbing, it’s essential to clear the area of larger debris. To enhance the effectiveness of damp mopping, always initiate the cleaning process with a thorough dust mop. It’s essential to use a clean dust mop for this purpose and avoid using oil-based dust mop treatments, which can have adverse effects.


Damp Mopping or Auto Scrubbing

Damp mopping is a daily or as-needed practice to eliminate particulate and oily soil and prevent floor finish discoloration or darkening due to embedded dirt. This cleaning method should be carried out regularly, especially when dealing with heavy soil accumulation. To effectively remove soil, use a clean mop and replace the mop water as soon as it becomes dirty. Damp mopping primarily targets the particulate dirt, which can harm floor finishes. Consider using an auto-scrubber when available for a more efficient and less resource-intensive approach. Auto-scrubbing enhances cleaning effectiveness and reduces the required floor cleaner by half!


Low-Speed Buffing

Doing this will effectively reduce surface scratches, unveiling a refreshed and smoother floor appearance. This process enhances light reflection, producing a more consistent and brilliant shine. Additionally, buffing serves to rectify the finish, promoting a polished surface and extending the duration before a recoat becomes necessary.


High-Speed Buffing

High-speed burnishing proves notably superior to low-speed buffing when restoring a smooth, shiny finish and extending the interval between recoating. This process effectively eliminates surface imperfections, such as light scratches, which may contribute to a lackluster floor appearance. Through a “shaving” action, it removes approximately 1/20th of the finish layer, thereby enhancing the floor’s overall sheen and durability.


Restorative Floor Care

Floor Stripping and Refinishing

Deciding to floor strip and refinish a floor becomes necessary when the floor has become discolored or yellowed due to deeply embedded dirt, and the standard scrubbing and recoating procedures no longer suffice to restore its original appearance.


In conclusion, the importance of proper floor care and using the best floor cleaning approach must be balanced when it comes to maintaining a presentable and clean office environment. From preventing wear and tear to ensuring a lasting positive impression on clients and employees, investing in the right floor cleaning strategies pays off. This blog has explored various approaches tailored to specific floor types and cleaning needs. Now, it’s time to take action and implement these strategies to transform your office floors. So, don’t wait – make your office shine with cleanliness and professionalism today!

If your busy schedule doesn’t allow you to do this, then feel free to contact us at Burgos Cleaning! We offer a range of cleaning services, from floor cleaning to deep cleaning offices around Tolland County or Windham County, Connecticut.