Benefits of Commercial Pressure Washing

cleaning building walls

Commercial buildings are often located in high-traffic areas, and as a result, they are constantly exposed to various elements that can accumulate on their surfaces. Dirt and debris can build up on exterior walls and sidewalks, while bird droppings can stain rooftops and parking lots. Pollution from nearby factories or highways can also settle on buildings, leaving behind a layer of grime. In addition, commercial buildings are often targeted by vandals who may spray paint graffiti on walls or deface signs and other outdoor fixtures. Grease and oil stains from vehicles or machinery can also accumulate on driveways and loading docks.


All of these elements, combined with the constant traffic of thousands of people passing through each year, can cause a significant amount of wear and tear on a commercial building. In order to maintain a clean and attractive appearance, commercial buildings require special care and attention from professional cleaners who have the expertise and equipment to effectively remove all of the accumulated dirt, debris, and stains.


One cleaning method that has started to steadily gain popularity is pressure washing. This method is one of the most efficient and effective ways of maintaining a building’s appearance and slows down its wear and tear. It is the go-to cleaning method of most commercial cleaning companies because it’s efficient and effective.


What is Pressure Washing?

Pressure washing, also known as power washing, is a cleaning method that involves using high-pressure water jets to remove dirt, grime, mold, and other types of buildup from surfaces. Pressure washing machines are equipped with a motor that pumps water at a high pressure, which is then forced through a narrow nozzle to create a powerful water stream that can effectively blast away even the toughest stains and debris.


This method is typically used for outdoor surfaces like entryways, sidewalks, driveways, decks, patios, and building exteriors. It can also be used to clean carpets, vehicles, machinery, and other types of equipment. The water stream’s pressure can be adjusted depending on the type of surface being cleaned, with higher pressure for tougher surfaces and a lower pressure for more delicate surfaces.


Pressure washing is an effective and efficient cleaning method that can save time and effort compared to traditional scrubbing and other cleaning methods. It is also environmentally friendly; it does not require the use of chemicals or other cleaning agents. However, it should be used with caution since high-pressure water jets can cause damage to some surfaces if not used properly.


Benefits of Pressure Washing

Removes stubborn stains and dirt

Pressure washing uses a high-power water jet to remove any stains and dirt on any surface. This also includes stubborn stains and dirt that normal scrubbing can’t do no matter how much time and effort you devote to it. This powerful cleaning method can blast any stain or dirt off surfaces.

real estate property

Increases property value

With those stubborn stains and dirt gone, your property’s value increases. Not only that but it also makes your curb and business more inviting. Remember a business’ appearance always reflects your business values and professionalism. It is up to you if you want to maintain an appealing building that attracts customers or not. 


Prevents damage on surfaces

As mentioned earlier, your building’s exterior surfaces come into contact with various elements. These elements stick to your exterior surfaces and accumulate. If not properly taken care of the accumulation will lead to damages that will surely cost you a lot of money. As a result, you have clean exteriors while avoiding costly repairs. Just make sure you are familiar with using pressure washers. They have different pressure settings for various surfaces. If you accidentally use a much stronger pressure on a surface it might cause damage. 


Improves air quality

Pressure washing not only blasts away stubborn stains and dirt, but it also ensures that any mildew, mold, and other pollutants that decrease air quality around your building are removed. With all these health hazards gone, you can expect improved air quality surrounding your building. 


Saves time, effort, and money

How much pressure washing helps you save money and time? The solution is straightforward: safeguarding your property and making maintenance easier for you, helps you save effort, money, and time. Without any accumulation on your surfaces, cleaning would be more efficient since you don’t have to spend a lot of time trying to battle that accumulation. It also saves you money because you don’t have to use as many cleaning products compared to when you still aren’t pressure washing. Furthermore, with its efficiency, cleaning 24/7 establishments is more convenient for the owners.



Without the need to use any harsh chemical cleaners, pressure washing is considered environmentally friendly. This is great news for businesses trying to reduce their carbon footprint. However, without the use of harsh chemicals, it takes a little longer to achieve your desired results. Nonetheless, the cleaning method keeps your building clean whilst not damaging the environment.

well maintained office

Enhances safety

Pressure washing can remove slippery mold and mildew from surfaces which reduces the risk of slip-and-fall accidents. This is specifically important for areas like pool decks, where a slip-and-fall accident can be particularly dangerous and inevitable. By removing these hazards, pressure washing can create a safer environment for occupants and guests.


With regular pressure washing, your commercial buildings will always look their best. 

Pressure washing has grown to be a well-liked technique for cleaning a variety of surfaces, including concrete, brick, siding, and even automobiles. It is utilized for both home and commercial cleaning, and cleaning contractors, landscapers, and other experts all depend on it.


With new features and innovations including eco-friendly cleaning agents, customizable pressure settings, and reliable engines, pressure washing technology is still developing today. It is still a considerable option for maintaining and cleaning a variety of surfaces.


However, a pressure washer is not as easy to use as you think. It requires an experienced and knowledgeable person to achieve the best results without causing any irreparable damage to your property. Try hiring a commercial cleaning service provider if you aren’t familiar with a pressure washer. If you’re located near Middlesex County or New Haven County, Connecticut, then we at Burgos Cleaning would be happy to help. Give us a call now to get a consultation!